Backlit LED Panel Light

Backlit LED Panel Light
Details:
Product Features:
1. Power Factor>0.90
2. Flicker Free
3. Color Rendering Index Ra>80; Ra>90
4. High-Quality 2835 SMD LED Chips
Send Inquiry
Description
Send Inquiry

Backlit LED Panel Light

Product Overview

The EG-PLBL series backlit LED panel light is a commercial-grade lighting solution purpose-built as a direct replacement for traditional fluorescent troffer fixtures in new construction and retrofit projects. Available in 5 standard sizes matching global ceiling grid dimensions, it delivers uniform, high-efficiency illumination while reducing energy consumption by up to 72% compared to equivalent fluorescent systems.
Engineered for long-term reliability in commercial environments, it features a heavy-duty aluminum chassis, premium SANAN 2835 LED chips, and a direct-back LED array design that eliminates the light guide plate (LGP) – the primary failure point in edge-lit panels. It supports multiple dimming protocols and three mounting configurations, making it compatible with virtually all commercial ceiling systems and building management systems (BMS).
This full specification document covers all technical details, installation guidelines, and performance metrics to support engineering design, project bidding, and facility operation.

 

Deep Dive: Backlit vs. Edge-Lit Panel Technology

Understanding the structural difference is critical for long-term project performance. Backlit panels place LED chips directly behind the diffuser in a uniform grid, while edge-lit panels rely on a side-mounted LED strip and a light guide plate to distribute light.
Performance Metric Backlit LED Panel (EG-PLBL Series) Conventional Edge-Lit Panel
Optical Efficiency 80–110 lm/W (higher, no LGP loss) 60–90 lm/W (LGP absorbs ~20% light)
Brightness Uniformity >0.85 across full surface, no edge dimming Prone to hotspots near edges and yellowing over time
Yellowing Risk None (no light guide plate) High – LGP degrades under UV exposure after 2–3 years
Thermal Performance Better – LEDs mounted directly to aluminum chassis Worse – heat concentrated at edge strips
Service Life 50,000+ hours 30,000–40,000 hours (limited by LGP lifespan)
Fixture Thickness 30mm 12–25mm
Total Cost of Ownership Lower – fewer replacement parts, longer life Higher – frequent panel replacement as LGP degrades
Best For High-usage commercial spaces, long-term installations Low-usage decorative spaces, ultra-thin aesthetic priority

 

Core Optical Performance Specifications

All performance values are tested under standard laboratory conditions (25℃ ambient temperature, rated voltage).
Light Source
-LED Chip Brand: SANAN 2835 SMD
-LED Array Configuration: Uniform matrix layout for optimal uniformity
-Standard Color Temperature Options: 3000K (Warm White), 4000K (Neutral White), 5000K (Daylight), 6500K (Cool White)
-Default CCT: 4000K (most common for commercial offices)
-Color Rendering Index: Standard Ra>80; Optional Ra>90 for color-critical applications
-MacAdam Ellipse: <3 SDCM for consistent color across batches
-Flicker Performance: 100% Flicker-Free, compliant with IEEE 1789-2015 No-Risk Level
-Unified Glare Rating (UGR): <19, compliant with EN 12464-1 office lighting standards
-Beam Angle: 120° wide distribution
-Illumination Uniformity: >0.85 at standard mounting height
Electrical Performance
-Input Voltage Range: AC 100–277V, 50/60Hz (universal); Optional AC 165–245V for regional markets
-Power Factor: >0.90 at full load
-Total Harmonic Distortion (THD): <20%
-Inrush Current: <20A per fixture
-Isolation Class: Class II (double insulation)
Mechanical & Environmental
-Housing Material: Aluminum frame + metal back chassis
-Optical Components: Customizable light guide and diffuser combinations
-IP Rating: IP40 (dust-protected, suitable for dry indoor environments)
-Operating Temperature Range: -15℃ to 40℃
-Storage Temperature Range: -25℃ to 60℃
-Rated LED Lifespan: 50,000 hours (L70 standard)
-Warranty: 3 years against manufacturing defects

 

Dimming & Control System Compatibility

The EG-PLBL series is designed to integrate seamlessly with all major commercial lighting control systems.
Available Control Options
1. On/Off Switching
-Simple relay control for basic applications
-Compatible with standard wall switches and timer systems
-No additional control wiring required
2. 0-10V / 1-10V Analog Dimming
-Dimming range: 10% – 100% brightness
-Smooth, flicker-free dimming across entire range
-Compatible with major brands: Lutron, Leviton, Philips Dynalite, Crestron, Control4
-Standard 2-wire control connection
3. DALI Digital Dimming
-Compliant with DALI-2 standard
Individual fixture addressing and group control
-Supports scene setting, scheduling, and energy monitoring
-Ideal for smart buildings and BMS integration
-Dimming range: 1% – 100%
Optional Add-On Controls
-Motion sensor (occupancy detection)
-Daylight harvesting sensor (photocell)
-Emergency backup battery (3-hour emergency operation)

 

 

Complete Installation Guide

Mounting Option 1: Recessed (Drop-In) Installation
Best For: Suspended T-bar ceiling grids (standard commercial office ceilings)
Required Accessories: T-bar ceiling grid (customer supplied), optional safety cable
Installation Steps:
1. Remove existing troffer or ceiling tile
2. Connect AC power and control wiring to fixture driver
3. Gently lower the panel into the ceiling grid opening
4. Ensure the panel rests evenly on all four sides of the grid
5. Test power and dimming function
Important: Actual panel dimensions are 5mm smaller than nominal ceiling size for easy drop-in fit.

Mounting Option 2: Surface Mount Installation
Best For: Drywall, concrete, or wood ceilings without suspension grids
Required Accessories: Surface mounting frame (ordered separately)
Installation Steps:
1. Mark and drill mounting holes according to frame template
2. Secure mounting frame to ceiling with screws
3. Make electrical connections to fixture
4. Snap panel into mounting frame
5. Secure with side screws (included with frame)

Mounting Option 3: Suspension (Cable) Installation
Best For: Open ceilings, industrial lofts, high-bay spaces
Required Accessories: Suspension cable set (4 cables per panel)
Installation Steps:
1. Install ceiling anchors at desired mounting points
2. Adjust cable length to required hanging height
3. Connect cables to panel mounting points
4. Level fixture using cable adjusters
5. Complete electrical wiring and test

General Installation Guidelines
-Minimum mounting height: 2.2m
-Recommended clearance above fixture: 50mm for ventilation
-Do not install in insulated ceilings without proper air gap
-All wiring must comply with local electrical codes
-Turn off power before installation or maintenance

 

Application-Specific Lighting Layout Guide

Based on EN 12464-1 indoor lighting standards, below are recommended layouts for common applications (3m ceiling height, 500 lux target for general work areas).

 

Application Recommended Model Spacing Between Fixtures Coverage Per Fixture Target Illuminance
Private Offices EG-PLBL-6060-55X 2.0 – 2.4m ~4 – 6 m² 300 – 500 lux
Open Plan Offices EG-PLBL-6060-55X 1.8 – 2.2m ~3.5 – 5 m² 500 lux
Classrooms EG-PLBL-6060-55X 2.0 – 2.3m ~4 – 5.5 m² 300 – 500 lux
Retail Sales Floor EG-PLBL-6012-80X 2.0 – 2.5m row spacing ~6 – 8 m² 500 – 750 lux
Hospital Patient Rooms EG-PLBL-3060-30X Linear layout, 2.5m spacing ~3 – 4 m² 300 lux
Corridors & Hallways EG-PLBL-3012-55X 3.0 – 4.0m spacing Linear coverage 150 – 200 lux

 

Energy Savings & ROI Calculationription

Comparison: 600×1200 Backlit LED Panel vs. 2×4 Fluorescent Troffer
Metric 4-Lamp 32W Fluorescent Troffer EG-PLBL-6012-80X LED Panel
Total Power Draw 128W (including ballast loss) 80W
Daily Operation (12hrs) 1.536 kWh 0.96 kWh
Annual Energy Use (250 days) 384 kWh 240 kWh
Annual Energy Cost ($0.12/kWh) $46.08 $28.80
Annual Savings Per Fixture – $17.28
Lamp Replacement Cost (2yrs) $12.00 $0 (no lamps to replace)
Simple Payback Period – ~2.5 years

 

Over a 10-year lifecycle, each LED panel saves approximately $210 in combined energy and maintenance costs.

 

Certifications & Compliancescription

- CE (Conformité Européenne) – LVD + EMC directives
- RoHS 2.0 – Restriction of Hazardous Substances
- FCC Part 15 – Electromagnetic compatibility (US market)
- UL 8750 (optional) – LED safety standard (US/Canada)
- IEEE 1789 – Flicker-free compliance
- EN 62471 – Photobiological safety
- ISO 9001 – Quality management system certification

 

 

Customization Options

- Custom color temperature (2700K – 7000K)
- CRI upgrade to Ra>90 or Ra>95
- Emergency battery backup (1hr / 3hr options)
- Integrated motion sensor or daylight sensor
- Logo printing on frame or diffuser
- Custom frame colors (white default, black/silver optional)
- Custom packaging with your brand
- Special voltage configurations
MOQ applies for custom options. Contact our engineering team for feasibility assessment.

 

Packaging, Shipping & StorageDescription

Packaging Details
- Individual inner box with EPE foam protection
- Standard export cartons for bulk orders
- Neutral packaging available for distributors
- Custom branded packaging available for OEM orders
Packing Quantities

 

Model Units Per Carton Carton Dimensions Gross Weight Per Carton
3030 10 pcs 620×320×180mm ~14 kg
3060 8 pcs 640×340×280mm ~18 kg
6060 4 pcs 640×640×180mm ~16 kg
3012 4 pcs 1240×340×180mm ~15 kg
6012 2 pcs 1240×640×180mm ~13 kg

 

Shipping & Storage
- Suitable for sea freight, air freight, and express courier
- Store in dry, covered warehouse environment
- Avoid prolonged exposure to high humidity (>85% RH)
- Maximum stack height: 8 cartons

 

Quality Assurance & Warranty

Quality Control Process
Every panel undergoes 5-stage QC before shipment:
1. Incoming material inspection (LED chips, drivers, aluminum parts)
2. In-process soldering and assembly inspection
3. 24-hour full-power aging test
4. Photometric testing (lumen, CRI, power factor)
5. Final visual and functional inspection
Warranty Terms
- 3-year limited warranty from date of shipment
- Covers defects in materials and workmanship under normal use
- Warranty does not cover: improper installation, water damage, overvoltage, accidental damage, unauthorized modification
- Warranty claims include replacement of defective products or refund at our discretion

 

 

Troubleshooting Guide

Issue Possible Cause Solution
Fixture does not turn on No power supply; loose wiring; driver failure Check circuit breaker; verify wiring connections; test driver output
Flickering light Incompatible dimmer; loose LED connections; low voltage Confirm dimmer compatibility; check internal wiring; verify input voltage
Dimming not working Incorrect control wiring; wrong dimmer type Check 0-10V/DALI wiring polarity; confirm dimmer matches fixture type
Uneven brightness Damaged diffuser; manufacturing defect Inspect diffuser for scratches; contact support for warranty claim
Buzzing noise Loose components; driver issue Tighten all screws; if noise persists, replace driver

 

Frequently Asked Questions

Q: Do these panels fit standard US 2×2 and 2×4 ceiling grids?
A: Yes. Our 595×595mm model fits standard 2×2 foot T-bar grids, and 595×1195mm fits 2×4 foot grids. The 5mm undersize ensures easy drop-in installation.
Q: What is the difference between 0-10V and DALI dimming?
A: 0-10V is an analog system that controls brightness via voltage signal – simple and cost-effective for basic dimming. DALI is a digital system that allows individual fixture addressing, scene control, and energy monitoring – better for smart buildings.
Q: Can I use these panels in outdoor covered areas?
A: The IP40 rating protects against dust but not water. They can be used in covered, dry outdoor areas but should not be exposed to rain, snow, or direct water spray.
Q: Do you provide IES files for lighting simulation?
A: Yes. IES photometric files are available for all models upon request, compatible with Dialux, Relux, and other lighting design software.
Q: What is the lead time for bulk orders?
A: Standard models: 7–10 working days. Custom configurations: 15–20 working days. Contact us with your quantity for an exact lead time.

 

Request a Quote

Send us your project requirements including model, quantity, dimming type, color temperature, and delivery location. We will provide a detailed quotation, technical data sheet, and project support within 24 business hours.

 

Hot Tags: Backlit LED Panel Light, China Backlit LED Panel Light manufacturers, suppliers, factory, led panel light, Edgelit LED Panel Light, Slim Recessed Round LED Panel Light A, EdgeLit Led Ceiling Light, Slim Recessed Square LED Panel Light B

Send Inquiry

We are one of the leading manufacturers and suppliers of LED grow lights in China. Welcome to wholesale high-quality LED grow lights from our factory. We provide samples and quotes. Please contact us for more details.