LED Strip Light

Our most popular series. Uses high-efficiency Sanan 2835 or 5050 SMD LEDs. Available in 60, 120, or 240 LEDs/m. Double-side copper PCB ensures even current flow and minimal voltage drop. Cut points every 2.5cm or 5cm. 3M adhesive backing.

Perfect for DIY users who don't own a soldering iron. The strip comes with pre-attached connectors or uses snap-on solderless clips. Connect multiple strips, add wires, or attach to a driver — all without heat or soldering. Ideal for renters or quick changes.

Unlike standard strips that shine straight up, this strip has LEDs mounted on the side. When placed in a cove or aluminum channel, light washes down the wall evenly. No hot spots. No visible dots. Creates a professional, high-end indirect lighting effect.

COB (Chip-on-Board) technology places LED chips directly on the PCB in a continuous line. The result is a seamless, unbroken beam of light — no individual LED dots visible even at close range. Perfect for glass shelf lighting, display cases, and luxury retail.

Choose your protection level:

• IP20: No protection. Indoor dry areas only.
• IP65: Silicone coating. Resists splashes and dust. Kitchens, bathrooms, covered patios.
• IP67: Silicone tube + sealed ends. Can be submerged 1m. Outdoor landscapes, fountains.
• IP68: Fully potted. Highest protection. Marine and extreme outdoor use.

This strip contains both warm white (2700K-3000K) and cool white (5000K-6500K) LEDs in alternating positions. By adjusting the brightness ratio between the two channels, you can achieve any white color temperature from cozy warm to energizing cool. Requires a dual-color controller (not included). Ideal for human-centric lighting, hotels, and bedrooms.

The simplest high-voltage solution. The strip comes with an AC plug attached. Just plug it into a wall socket. No external driver box needed. Can run up to 50-100 meters without voltage drop. Cut points every 1 meter or 2 meters. Best for large retail stores, wedding venues, and event halls.

Identical to the standard AC strip but without any pre-attached input wires. This allows you to connect your own wires or custom connectors directly to the cut points. Provides a cleaner, more professional installation for permanent fixtures.

Advanced integrated circuit design. Each segment contains its own driver IC. The strip connects directly to 110V/220V AC power — no external driver or transformer required. Cuttable every 1 meter. Each cut segment still functions independently. Massively reduces installation cost and complexity for large projects.

Same as series #9, but with an additional spray coating layer. This coating provides basic protection against dust, moisture, and accidental contact. Not fully waterproof (not for submersion), but suitable for covered outdoor areas, garages, and workshops.

Our premium decorative series. A flexible silicone tube (round or square) that diffuses light evenly to look like traditional glass neon — but it bends, rolls, and ships easily. Available in single color, RGB, or tunable white. UV-resistant silicone for outdoor use. Ideal for store front signs, bar counters, wedding backdrops, and letter-shaped logos.

Use LED strip lights under cabinets as trendy task lighting. It’ll illuminate your counters and your beloved backsplash. For extra pizzazz, add a strip under your bottom cabinets as well—it’ll add more dimension to your room and give you several good options for night lighting!

For some subtle lighting in the hallway, apply the strip lighting under the trim piece that is dropped from the ceiling. As for bookshelves, line them inside, under, or above shelves to dress then t up and make them extra inviting.

In addition to spotlights or general lighting, lining the back or sides of a frame really makes artwork pop!

Use a similar trick for small children up to teens, turning strip lighting into a fashionable, functional nightlight.

LED strip lights are a low-cost way to bring some soft mood lighting to your most relaxing space. Line them along your headboard, around artwork, or bordering your doors.

Add LED’s behind your bathroom mirror for an extra glow, or consider one of their most functional uses ever—under the cabinet lighting! Prevent middle-of-the-night toe injuries by using subtle strip lights to illuminate the space.