T12 Integrated Waterproof LED Tube Grow Light Bar

T12 Integrated Waterproof LED Tube Grow Light Bar
Details:
T12 Integrated Waterproof LED Tube Grow Light Bar adopts an integrated design, which is sturdy and durable. Excellent waterproof performance, no fear of humid environment. It can provide various spectrums to promote plant photosynthesis and accelerate growth.
Send Inquiry
Description
Send Inquiry

T12 Integrated Waterproof LED Tube Grow Light Bar

 

Products Description

The T12 Integrated Waterproof LED Tube Grow Light Bar is a fully sealed, all-in-one supplemental lighting solution designed for greenhouse and indoor cultivation environments where moisture, dust, and space constraints are everyday challenges. Unlike conventional grow light bars that expose drivers and wiring to the environment, the T12 integrates the driver directly into the tube body, creating a single, compact fixture with no external components to mount or protect.

With a narrow 38mm profile and a 44mm height, this fixture fits easily into multi-tier propagation racks, seedling benches, and inter-row greenhouse spaces where wider fixtures cannot be installed. The full PC outer tube and internal aluminum heatsink work together to provide IP65 protection against water jets and dust while maintaining efficient thermal management for the LED array.

Available in 30W and 50W configurations, the T12 offers two spectrum options: Full Spectrum 2000K for general crop support across all growth stages, and Full Spectrum Strawberry for fruiting crops that benefit from enhanced red and far-red output. The fixture supports single or double wiring and group daisy-chain connection in both series and parallel modes, enabling scalable installation without complex wiring.

 

 

Products Description

Specification Sheet
Product Name T12 Integrated Waterproof LED Tube Grow Light Bar
产品名称 T12一体防水植物灯A
Model EG-WI12PATG-12030 EG-WI12PATG-12050
Product Picture product-125-119
Product Size(mm) L1200*38*44
Wattage(W) 30 50
LED Qty 198 256
Spectrum product-122-82product-123-82Full Spectrum 2000K Full Spectrum Strawberry
LED Light Source 450nm; 660nm; (730nm); (395nm)
LED Brand SANAN 2835
Product Materials Full PC+Aluminum Heatsink Inside
PPFD@0.3m(umols/s/m2) ~80 ~160
PPE(umol/J) 2.0~2.4
Power Factor(PF) >0.95
Flicker or Flicker Free Non Flicker
Input voltage(V)/
Frequency(Hz)
AC100~277V 50/60Hz
Dimming Non Dimmable
View Angle 120º
IP Rating IP65
Operating Temperature(℃) -15~40
Warranty 3 Years
Inner Box Size(mm)  
Outer Carton  
Feature 1. Customized Spectrum Available
2. Single Wiring or Double Wiring
3. Group Daisy-Chain Connecting: Series connection or Parallel connection

 

Integrated Design: What It Means and Why It Matters

The term "integrated" in the T12 product name refers to the driver being built directly into the tube body. This design approach offers several practical advantages for commercial growers.

 

Simplified Installation with Fewer Components

Traditional grow light bars require an external driver that must be mounted separately, usually on a wall or rack frame. This adds installation steps, requires additional mounting hardware, and introduces extra wiring connections that can loosen or corrode over time. The T12 eliminates these issues by housing the driver inside the tube. Installers simply mount the fixture, connect the power cable, and the system is ready to operate.

 

Reduced Failure Points in Harsh Environments

External drivers are particularly vulnerable in humid greenhouses and outdoor growing areas. Moisture can enter through cable glands and connector interfaces, causing corrosion and electrical failure. The T12's integrated driver is sealed within the same IP65-rated housing as the LED array, protecting it from the same environmental threats. This reduces the number of potential failure points and simplifies maintenance.

 

Slimmer Profile for Space-Constrained Applications

By eliminating the external driver box, the T12 achieves a narrow 38mm width and 44mm height. This slim profile allows the fixture to fit into tight spaces where standard grow bars cannot be mounted, including low-clearance propagation racks and narrow inter-row gaps in greenhouse benches.
 

 

Full PC Tube with Internal Aluminum Heatsink: A Dual-Layer Protection System

The T12 uses a full polycarbonate outer tube that serves as both the optical cover and the primary environmental barrier. Polycarbonate is chosen for its high impact resistance, UV stability, and optical clarity. Unlike glass, it will not shatter if struck during installation or maintenance. Unlike acrylic, it resists yellowing and brittleness over years of exposure to light and heat.

Inside the PC tube, an aluminum heatsink is positioned directly behind the LED array. This internal heatsink absorbs heat from the LEDs and distributes it along the length of the fixture, where it dissipates through the PC tube surface. The combination of an internal heatsink and a sealed outer tube allows the T12 to maintain stable LED operating temperatures without requiring ventilation holes or external cooling fins that could compromise the IP65 rating.

 

IP65 Protection: Practical Benefits for Growers

The IP65 rating provides complete protection against dust ingress and resistance to low-pressure water jets from any direction. In a greenhouse setting, this means the T12 can be installed under overhead irrigation lines without additional shielding. It can be sprayed down during routine sanitation. It can operate in high-humidity propagation rooms where condensation forms on surfaces overnight.

For outdoor supplemental lighting applications, the IP65 rating provides reliable performance in rain and dew, provided the fixture is not submerged. The sealed construction also prevents insects and airborne plant debris from entering the fixture, which can cause shadowing and reduce light output over time.

 

Spectrum Options for Different Crop Requirements

The T12 is available in two spectra, each calibrated for specific cultivation objectives.
 

 

Full Spectrum 2000K

This warm, balanced spectrum supports photosynthesis and healthy morphological development across a wide range of crops. It is well-suited to leafy greens, herbs, vegetables, and ornamental plants in greenhouse and indoor environments. The 2000K color temperature produces natural-looking light that makes it easier to visually assess plant health and detect pest activity.
 

 

Full Spectrum Strawberry

This spectrum is optimized for fruiting crops that respond to enhanced red and far-red output. Research on strawberry cultivation shows that during flowering and fruiting, a red-to-blue ratio in the range of 5:1 to 9:1 significantly improves yield and fruit weight compared to standard full-spectrum lighting. The inclusion of 660nm deep red supports flowering and sugar accumulation, while 730nm far-red influences photoperiod response and plant architecture. The Strawberry spectrum is also suitable for tomatoes, peppers, and other fruiting vegetables where enhanced red output supports fruit set and quality.
 

 

Daisy-Chain Connectivity for Scalable Installations

The T12 supports group daisy-chain connections in both series and parallel modes using sealed connection interfaces that maintain the IP65 rating across linked fixtures. This modular approach simplifies installation and reduces wiring costs for large-scale projects.

Connection Guidelines:

- Recommended group size: 10 to 20 fixtures per group

- Maximum load: 60W per group for optimal safety

- Both series and parallel modes are supported

The sealed connection interface is a critical design detail. In humid or wet environments, standard electrical connectors are vulnerable to moisture ingress. The T12's sealed interfaces ensure that the protection rating is maintained even when multiple fixtures are linked together.

 

Product Features & Benefits

Integrated All-in-One Design

The driver is built directly into the tube body, eliminating external driver boxes, reducing wiring connections, and simplifying installation. The integrated design also reduces the number of potential failure points in humid environments.

IP65 Waterproof and Dustproof

The full PC outer tube and sealed construction provide complete protection against dust ingress and water jets from any direction. The fixture performs reliably in overhead irrigation zones, high-humidity propagation rooms, and outdoor growing areas.

Slim 38mm Profile for Tight Spaces

The narrow width and low height make the T12 ideal for multi-tier propagation racks, seedling benches, and inter-row greenhouse installations where vertical clearance is limited.

Internal Aluminum Heatsink

The aluminum heatsink inside the PC tube absorbs heat from the LEDs and distributes it along the fixture length for efficient thermal management without compromising the IP65 seal.

High-Efficiency Full Spectrum Output

With a PPE of 2.0–2.4 µmol/J and PPFD output of 80–160 µmol/s/m² at 0.3m, the T12 delivers efficient, usable plant light. The spectrum includes 450nm blue, 660nm deep red, and optional 730nm far-red and 395nm UV wavelengths.

Modular Daisy-Chain Connectivity

Series and parallel connections via sealed interfaces allow scalable installation for projects of any size. Connect up to 10–20 units per group without complex wiring.

 

Application Fields

- Commercial greenhouses (vegetables, flowers, fruit trees)

- Multi-tier propagation racks and seedling benches

- Indoor vertical farms and grow rooms

- High-humidity propagation zones

- Strawberry and other fruiting crop production

- Outdoor supplemental lighting under covered structures

Suitable for leafy greens, fruiting vegetables, ornamental flowers, and high-value specialty plants.

 

Practical Installation & Layout Guide

Mounting Height: 15–30 cm above the plant canopy. Adjust based on crop type and light intensity requirements. Avoid placing fixtures too close to foliage to prevent heat stress.

Daisy-Chain Limits: Do not exceed 10–20 fixtures per group. Use separate circuits for larger installations to balance electrical load.

Wiring Options: The T12 supports single or double wiring configurations. Choose based on your layout and power distribution requirements.

Protection Notes: IP65 protects against water jets and dust, but do not submerge the fixture. Maintain air circulation around the housing for optimal heat dissipation.

Mounting Orientation: The fixture can be mounted horizontally or at a slight angle. For greenhouse inter-row applications, horizontal mounting above the canopy is recommended.

 

Buyer-Oriented Service

Wholesalers

We support bulk orders with stable component stock, neutral export cartons, and competitive wholesale pricing. Contact us for MOQ and lead times.

Distributors

We provide spec sheets, IES files, product images, and basic marketing materials to help you promote the product in your local market. Standard models are available for quick order.

Brand Owners

OEM service includes logo printing, custom packaging, and spectrum tuning (MOQ applies). Send your project specs for evaluation.

Retailers

Small-batch and sample orders are available for market testing. We ensure packaging integrity and flexible order sizes.

 

Quality Commitment

Every T12 Integrated Waterproof LED Tube Grow Light Bar passes multiple checkpoints before shipment: incoming material inspection, full-power aging, photoelectric testing, and IP sampling. Test reports and photometric data are available upon request. The 3-year warranty covers manufacturing defects under proper installation and normal use.

Certifications: Relevant international safety certifications can be provided for your reference.

 

OEM & Custom Solutions

Custom options:

1. Logo engraving or printing on housing

2. Custom export packaging

3. Spectrum tuning (MOQ applies)

Send your artwork, packaging requirements, spectrum needs, and order quantity. We will evaluate feasibility and provide a formal proposal.

 

Factory Strength & Our Production & QC Workflow

Our factory runs a complete production line for horticultural LED lighting, from incoming materials to finished goods. We handle large-volume orders and can arrange virtual factory tours.

1. Incoming material check: LED chips, aluminum heatsink, PC tubes, and drivers are sampled and verified before assembly.

2. Assembly: Standardized soldering and wiring procedures on professional lines.

3. Aging test: Finished units run at full power for extended periods to catch early failures.

4. Photometric test: Random units are tested for PPFD, PPE, power factor, and spectrum.

5. IP test: Batch sampling for water-jet and dust resistance.

6. Final inspection & packing: Visual check, function test, then export carton.

Available documents: Photometric report, IES file, batch test records, certification copies.

 

Storage & Shipping Notice

Store in a dry indoor warehouse. Avoid long-term exposure to high humidity.

Cartons are designed for sea and air freight. For distributor redistribution, reinforced packing can be discussed.

 

Reference Project Snippet

Project 1: 400+ units installed in a commercial propagation facility, providing supplemental lighting on multi-tier seedling racks with high humidity and daily irrigation cycles.

Project 2: Private-label order for the North American market with custom spectrum and neutral packaging for local resale.

Full case materials available after inquiry.

 

After-Sales Support

3-year warranty for manufacturing defects. Damage from mis-wiring, improper installation, man-made breakage, or out-of-range temperatures is not covered.

Installation manuals, spec documents, and IES files provided.

Online technical support for troubleshooting.

 

FAQ

Q1: What does "integrated" mean in the T12 product name?

A: Integrated means the LED driver is built directly into the tube body rather than mounted externally. This eliminates the need for a separate driver box, reduces wiring connections, and simplifies installation. It also protects the driver from moisture and dust since it is sealed within the same IP65-rated housing as the LEDs.

Q2: Can the T12 be used in a greenhouse with overhead irrigation?

A: Yes. The IP65 rating provides complete protection against dust and resistance to water jets from any direction. The fixture can be installed under overhead irrigation lines and sprayed down during cleaning without risk of internal damage. Do not submerge the fixture fully underwater.

Q3: What is the difference between the 30W and 50W models?

A: The 30W model produces approximately 80 µmol/s/m² PPFD at 0.3m and is best suited to low-light crops, seedlings, and supplemental lighting in tight spaces. The 50W model delivers approximately 160 µmol/s/m² at the same distance and is better suited to crops with higher light requirements or larger coverage areas.

Q4: How many fixtures can I connect on one daisy chain?

A: The recommended maximum is 10 to 20 fixtures per group, depending on total wattage. For optimal safety, keep the total load at or below 60W per group. For larger installations, use multiple circuits to distribute the load evenly.

Q5: What is the benefit of the internal aluminum heatsink?

A: The internal heatsink absorbs heat from the LEDs and distributes it along the fixture length, where it dissipates through the PC tube surface. This design provides efficient thermal management without requiring ventilation holes or external cooling fins that would compromise the IP65 rating.

Q6: Is the T12 dimmable?

A: The standard T12 model is non-dimmable. If you require dimming capability, please contact our sales team to discuss custom options for your project.

Q7: Can the T12 be used outdoors?

A: The IP65 rating and sealed construction make the T12 suitable for outdoor supplemental lighting under covered structures, provided the fixture is not submerged in water. For permanent outdoor installations, mount the fixture with a slight downward angle on the connection ports to prevent water pooling.

Q8: What maintenance does the T12 require?

A: Maintenance is minimal. Turn off power before cleaning, then wipe the PC tube with a damp cloth or spray with water. Do not use abrasive cleaners or solvents. Inspect the seals and connectors periodically to ensure they remain tight.

Q9: Do you provide IES photometric files for lighting simulation?

A: Yes. IES files and photometric test reports are available upon formal inquiry. These files support lighting layout simulation in commercial farm design software, helping you plan fixture placement and calculate PPFD uniformity before installation.

Q10: What certifications does the T12 have?

A: Relevant industry certification documents can be provided upon request. These certifications demonstrate compliance with common international safety standards for commercial horticultural lighting applications.

 

Get In Touch

Please send an inquiry with your target model, purchase quantity, buyer type, and a brief project background. We will respond with a quotation, supporting technical documents, and practical suggestions for your growing project.
 

 

Hot Tags: T12 Integrated Waterproof LED Tube Grow Light Bar, China T12 Integrated Waterproof LED Tube Grow Light Bar manufacturers, suppliers, factory, t8 grow light led, led 100w grow, t8 grow light, undercanopy led grow light, greenhouse grow light tube, led grow light IR

Send Inquiry

We are one of the leading manufacturers and suppliers of LED grow lights in China. Welcome to wholesale high-quality LED grow lights from our factory. We provide samples and quotes. Please contact us for more details.