1. Look at the packaging and labels
National mandatory product LED lighting manufacturers mark the following on the packaging: rated voltage range, rated power, rated frequency. Under normal circumstances, high-quality printed products have good quality, clear writing and are not easy to fall off. Wipe with a soft damp cloth. The logo is clearly legible, including the manufacturer's trademark and related certification marks.
2. Look at the appearance of LED light tubes
Real LED fluorescent lamp. From a lamp perspective, the shape and size of lamps are better and more consistent, product consistency is better, and quality assurance is easier. Of course, there should be no cracks in the appearance and loose joints. LED lamps must choose the engineering plastic flame-retardant plastic PC shell. Ordinary plastic deformation and flammability, the aluminum tube must be bright, aviation aluminum.
3. Working temperature
When the LED fluorescent lamp is operating normally, the temperature should be low. Otherwise, the life of the LED light is very short. At the same time, when the energy-saving lamp is lit, it flashes rapidly or fluctuates very harshly, indicating that there is a quality problem with the energy-saving lamp. A few minutes after the power is turned on, there should be a temperature, which proves that the heat dissipation is good and the aluminum substrate is used for heat dissipation. There is no temperature, it is a fiberglass board, and the heat cannot be dissipated.
4. Check the startup performance
The startup of LED fluorescent lamps has a special feature: it lights up when powered on and does not flicker.
5. Weigh and compare the weights of each other. The heavier ones are better than the lighter ones. The heavier ones indicate that the materials are better used.













